Tiny Pythons > Children's Python Care Sheet - Antaresia childreni
pythons come from the North of Australia. The name is not derived from any
relationship to children, but in honor of John George Children, who was a
curator of the zoological collection at the British Museum in the 19th Century.
They are also called the faded python as their spotted pattern fades as they
mature. They inhabit many different types of habitat, and because of this
adaptability they do well in captivity. In the wild,
children's pythons feed on lizards and frogs when young, and may include some
mammalian prey as adults. Our captive bred children's pythons are fed
exclusively on frozen/thawed mice.
Housing / Heating / Lighting
Children's pythons can be housed in pairs or trios, however they should
always be separated when feeding in order to ensure there are no mishaps. They
do like to climb and will make use of any available branches or other
'furniture' inside the cage. Ours enjoy having a varied environment to explore,
including using toilet paper tubes to thread through.
Keeping childreni in a glass type aquarium will require a minimum 20
gallon long type tank for a single snake or 30 gallon long for a pair. Our adult
pair are kept in an enclosure measuring 1.5 feet deep x 4 feet wide x 1 foot in
height. Since glass is not an insulator we recommend using either rigid
insulation board or Reflectix insulation along at least the back if not the
sides to allow for better temperature retention. On top you can lay a piece of
either to keep the heat from escaping as long as you allow a bit of breathing
space for air to get in and out.
Aspen shavings are an inexpensive and readily available bedding which allows
for easy spot cleaning, unlike 'reptile carpet' being sold in pet stores. The
shavings should be completely cleaned out and replaced at least every other
They will need a water bowl with clean water available to them at all times.
Pythons love fresh water! Having a water bowl also lends humidity to their
environment which helps them to shed.
The enclosure should have a cool side and a hot side--the goal is to create a
"temperature gradient". This will allow the snake to
pick the temperature zone it wants to be in (thermoregulation). In the day
time, the hot end
of the enclosure should be set at 88 - 90 Fahrenheit, and the cool end at about
80. At night, temperatures can drop by about 5 degrees. (Lowering the
temperature at night will help mimic the natural day/night cycle, but it is not
a requirement.) There are many different heating options available such as placing an under tank heat mat / a back or top heat panel on one
side and leaving the other side to be the cool end. With any heating device you will want to acquire a thermostat to ensure
that your enclosure's hot end does not get too hot. A less-expensive (and
somewhat less reliable) option is to use a thermometer and rheostat (dimmer) to
control the temperature. Whatever you decide to use, it is very important
to precisely monitor and control the temperature at all times. Adding heavy,
heat-absorbing objects like rocks in the enclosure can also help raise the
NEVER use electric "heat rocks" for your snake's enclosure - they
can cause severe burns. Great care should also be taken if you choose to
use a heat lamp. Lamps can easily get too warm, even at very low wattage, and the
additional lighting is unnecessary for
their health/happiness. If there is natural daylight coming into the room, that will be
more than enough to give your snake the appropriate day/night cycle. They do not require UV as many lizards do.
The enclosure should have at least two hides to allow the snake to choose
more than one location. One should be on the hot side and the other on the cool
side. Hides can be anything from inverted plastic flower pots,
plastic bowls with a hole cut into them, or a plastic container such as a Rubbermaid
box set up the same way. If you want to make a humid hide to help your snake
shed, you can easily construct one out of a Rubbermaid container with holes for
their entry and exit, lined with damp long fiber peat moss which is usually
available at garden stores.
Juvenile pythons are fed on pinkies (baby hairless mice) but as they mature
can be fed on larger adult mice. The frequency of feeding is dependant on the
size of the meal they are served, but it is common for a snake to only eat 1-2
mice a week. A snake can handle a meal much larger than you might think, but its
meal should only be in girth just over the girth of the snake itself. If you're
feeding your snake and you don't see a bump, it's time to go up to the next size
prey-item or perhaps feed more often until they are ready to handle another size
larger. Another way to determine a good meal for your snake is by weight--A good
meal is ten percent of the weight of the snake.
TIP - Get a calendar to keep track of your snake's feedings and
sheddings. Since they are not a pet you feed every day, you might find that you
forget when and what their last meal was. It's also helpful to keep a record for
The children's python is one of the smallest pythons not only in Australia,
but in the world. Only the anthill python is smaller. It reaches about 3
feet, but most only reach a length of 2 - 2.5 feet. By comparison a ball python
(one of the most popular snakes in the pet trade) can reach 4-5 feet in length
and is a far heavier bodied snake.
This species of python lives on average around 20 - 30 years depending on the
level of care they receive.
When your snake is getting ready to shed (approximately once a month) it's
eyes will glaze over to a milky white. Usually it's best to leave your snake
alone during this time as it will most likely just want to hide until the
process is complete. The shed should come off in one piece if there is adequate
humidity in the enclosure. If you encounter shed that is still left on the
snake, setting up a humid hide for them will help them get the moisture they
need to get rid of the rest of the incomplete shed. If your snake is having a
very bad time with shedding, you should consult a veterinarian.
Recommended shopping / reading
Dragon's Lair heat mats / heat panels - from Big Apple Herp - www.bigappleherp.com
Installs with your own tape (such as Reflectix) so you can reposition it,
unlike fully adhesive store-bought mats.
Big Apple Herp thermostats - from Big Apple Herp - www.bigappleherp.com
Available in both static and proportional controls
All-glass Aquariums - http://www.all-glass.com/products/cages/index.html
If you're going to go with an aquarium type enclosure, the best is the sliding, locking,
screen top of this product including tabs that break out for insertion of
thermostat probes etc.
Aspen bedding - From Kaytee - www.kaytee.com
as it is dustless, easy to spot clean, and harmless to the herps. It's
inexpensive and readily available at PetSmart too.
Reflectix insulation and tape - www.reflectixinc.com
Available at home / building supply stores near you for helping to keep the
heat where it's needed--inside your enclosure!
Web resources - www.kingsnake.com,